[Rfdump] Fwd: USB readers and RFDump

[Lukas Grunwald]

Hi Jen,

Jen King wrote:
> Apologies if anyone gets this twice - I'm not sure this went through. 
>
> Begin forwarded message:
>
>> *From: *Jennifer King <jenking at law.berkeley.edu 
>> <mailto:jenking at law.berkeley.edu>>
>> *Date: *October 12, 2007 1:35:46 PM PDT
>> *To: *rfdump at lists.dn-systems.net <mailto:rfdump at lists.dn-systems.net>
>> *Subject: **USB readers and RFDump*
>>
>> Hi - has anyone had any success getting RFDump to work with a USB 
>> reader?  I am considering purchasing an ACG USB-based reader, and am 
>> wondering if there are any issues getting RFDump to see a USB port 
>> vs. a serial port. (I will be running the RFDump VMWare image on a 
>> Windows XP machine). I am not particularly well versed with ports on 
>> either Windows or Linux, so any advice would be welcome.
It is simple, just pass the USB Port to the VMWare, the Image contains a 
USB-Serial Drivers, converting the Reader USB Port back to an serial 
port inside the Linux RFDump Image.
You only have to look at the boot messages, what will be the tty, 
normaly /dev/ttyusb0 or similar, just change it to this port via GUI and 
that's it.
>>
>> Thanks,
>>
>> Jen King
>>
>> UC Berkeley
>
>


-- 
Gruss
    Lukas Grunwald aka REG lg1
    
 http://www.dn-systems.de  mail: l.grunwald at dn-systems.de 
 DN-Systems Enterprise Internet Solutions GmbH
 Hornemannstr. 11 31137 Hildesheim, Germany     
 Tel. +49-5121-28989-0 Fax. +49-5121-28989-11 
 21 Sunrise Ct, S.San Francisco, CA 94080, USA
 Tel. +1-650-472-2512  Mob. +1-650-430-1219
 Handelsregister HRB-3213 Amtsgericht Hildesheim
 Geschäftsführer Lukas Grunwald

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dn-systems.net/pipermail/rfdump/attachments/20071018/b7d8906b/attachment.html