[Rfdump] com port

[Stefan Kelm]

Hi Lukas,

thanks for the prompt reply.

> you can try to start the VM first, then connect the reader, the actual
> VM contains a USB-Driver for the reader, so you should get /dev/ttyUSB0.
> Change the RFDUMP Port to the new USB Port, check if it works with dmesg.

Indeed, I do get this port but using  rfdump -p /dev/ttyUSB0
still leads to "Could not reset RFID reader".

> Be sure the BPS rate is 9600 and the protocol is ASCII not binary.

Ack.

Still, that doesn't explain the problems I have with the reader
connected to my Linux workstation.

Cheers,

	Stefan.

--------------------------------------------------------
Stefan Kelm
Security Consultant

Secorvo Security Consulting GmbH
Ettlinger Strasse 12-14, D-76137 Karlsruhe

Tel. +49 721 255171-304, Fax +49 721 255171-100
stefan.kelm at secorvo.de, http://www.secorvo.de/
-------------------------------------------------------
PGP Fingerprint 87AE E858 CCBC C3A2 E633 D139 B0D9 212B