[Rfdump] com port

[Lukas Grunwald]

Hi,

you can try to start the VM first, then connect the reader, the actual 
VM contains a USB-Driver for the reader, so you should get /dev/ttyUSB0.
Change the RFDUMP Port to the new USB Port, check if it works with dmesg.

Be sure the BPS rate is 9600 and the protocol is ASCII not binary.

Stefan Kelm wrote:
> Hi,
>
> I've stumbled over the very same problems as Denis: initially the ACG
> reader (ACG DualISO USB) worked fine both within the VM live image
> as well as with the Windows tools as provided by ACG
> (e.g., ReaderUtility.exe).
>
> Now, I'm no longer able to connect to the reader using RFDump v1.4. Even
> using a plain SUSE 10.1 workstation I can't connect ("reset resulted in
> nothing") at all. ReaderUtility.exe under Windows still works fine,
> though.
>
> Would it be possible that the firmware somehow got corrupted (how would
> I tell?) or is RFDdump unstable as of yet?
>
> Cheers,
>
> 	Stefan.
>
>   

-- 
Gruss
    Lukas Grunwald aka REG lg1