[Rfdump] Texas instruments RFID reader support

[Tom Heydt-Benjamin]

As Lukas mentioned, rfdump does not support the s4100.  I have written a c
library for the s4100 that covers most of its functionality, but requires a
programmer with reasonable sophistication to use.  If you are comfortable
with c, and want a copy of the current state of the libraries, I can give
them to you.

Be aware that doing things like modifying data on cards requires knowlege of
the specific protocol spoken by the card.  My library offers no generic
support, since I work primarily with ISO 14443, which has no generic write
command.

On 10/18/06, Robert <rf at gunny.org> wrote:
>
>  I have a TI-RFID reader (model S4110) found at
> http://www.ti.com/rfid/shtml/prod-evalkits-RF-MFR-RNLK-00.shtml. I've
> tried everything I can think if to get it working with rfdump, including
> downloading and using the VMWare image located on your site. All I get is
> "Could not reset RFID reader". The device works fine with the software
> provided by Texas Instruments, but it does not allow me to modify data on
> the cards.
>
> Do you know if this RFID reader is supported? If not (or if it is
> unknown), is there anything I can do or information I can provide to get the
> device functioning?
>
> Thanks!
>
> -Robert
>
> _______________________________________________
> Rfdump mailing list
> Rfdump at lists.dn-systems.net
> http://lists.dn-systems.net/mailman/listinfo/rfdump
>
>
>


-- 
Sincerely Yours,
               ---Tom Heydt-Benjamin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dn-systems.net/pipermail/rfdump/attachments/20061018/a7ac8c5b/attachment.html