Betreff: Re: [Rfdump] Serial Port problems II

[Tobias Grutza]

It`s not diabled, when I work under Windows withe the origianal Software
(it`s not very good)
everything is running well
 
thanks for your help
 
tobias 
 
-------Originalmeldung-------
 
Von: Tobias Koeck
Datum: 28.11.2006 10:55:55
An: Tobias Grutza
Cc: rfdump at lists.dn-systems.net
Betreff: Re: [Rfdump] Serial Port problems II
 
perhaps you have disabled the serial port in your BIOS configuration
 
greetings
tobias
 
Tobias Grutza wrote:
> Hi Robert,
> thank`s for your help. I tested the way you discribed me, but it didn`t
> work.
> When I set up the serial port in the virtual mashine to com 1 and power
> up your image (set to : dev/ttyS0)
> I always recive after trying to RESET --> reset resulted in nothing
> followed by the Messagebox: Could not reset the RFID reader.
> What do I do wrong ? Does ttyS0 means equal com1 ?
> I`m using a ACS reader  Type ACR 120 SDK (serial) do you think it`s a
> communikating problem because of the reader?
>
> thanks
> Tobias
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Rfdump mailing list
> Rfdump at lists.dn-systems.net
> http://lists.dn-systems.net/mailman/listinfo/rfdump
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.dn-systems.net/pipermail/rfdump/attachments/20061128/305dccb4/attachment.html